Making Your Own Replacement Key For Saab 93 Viggen
Saab owners who lose a key may be worried about the expense and hassle of replacing it. You can reduce the expense by creating your key fob yourself.
To do this, you'll require an screwdriver with a flat head. Place the screwdriver in the slot in the middle of the case and slowly work it open.
Cost
Some used cars only have one key, whereas most SAABs have two keys. In this instance, the owner will have to purchase an additional key. This can be expensive. There are a variety of ways to cut costs on this process. For instance, if you just need a replacement key fob case and you want to save money by purchasing used cases from an auto dealer. However, be aware that these cases do not contain the badge or emergency key, and are prone to wear out quickly.
You must also pay for the installation and programming the TWICE module. These costs can add up quickly, especially if you don't have a spare.
It is vital to have two keys in your vehicle. This way, in the event that you lose the only working key, you won't be stuck with no transportation.
The good news is that adding a second key to your Saab 9-3 isn't so difficult as it could seem. The only problem is that you'll need to connect the key to the car's computers. This can be accomplished through an authorized dealer, but it may take some time to set up an appointment. Luckily, you can find the necessary information online to assist you with the procedure.
Installation
Most Saab cars manufactured after 1995 have a special immobilizer system that utilizes keys to control the car's engine. This system also controls the doors' locks as well as the remote functions for the car. It is essential to keep a spare key on hand to ensure that you don't lose the original and having your car stolen. The positive side is that if you lose your primary working Saab key, there are ways to replace it without having to pay the expense of a dealer service.
The first step is to make the new key fob. To do this, use a flathead to pry open the case. Simply place The Key Lab in an opening in the middle of the case and slowly work it. If you're having trouble, try using different angles. Once you've opened up the case, you can take out the electronics and put them in a brand-new fob case.
You can begin the process of programming when you have the replacement key and fob. You'll need to connect your Tech2 and then follow the steps for NG 9-3 either with or without transponder. It is recommended to make use of a replacement TWICE unit that is already connected to the correct key via the transponder. You can find such a unit online however, you must make sure that the replacement is an OEM part.
Programming
In general, adding an extra key for a Saab 9-3 requires an additional tool called Tech 2. Tech 2. This also involves programming the vehicle to recognize the new keys. This is a much more complex procedure than simply copying a metal key. It must be performed by a professional in order to not harm the electronic system of the vehicle. It is best to get a spare car key as soon as you can. If you delay, it could cost a lot more in the future.
You'll also need to replace either the TWICE or CIM modules. This is usually a mail-order process and not something you can get with an aftermarket supplier. The cost of a brand new car can be very high in relation to the car model.
There's a way to avoid the dealer who is charging you top dollar to replace your car computer. S.A. Locksmith & Security can re-program the EEPROM on your Saab computer and prepare your vehicle for the new key, saving you the cost of a brand new car computer! This service is fast, affordable and easy. You will save as much as 50% on what the dealer would charge. This is an excellent solution for those who have lost their keys.
Remotes
The Saab 9-3 Viggen is one of the most unique cars ever to sport the Saab badge. It was a Scandinavian, front-drive, fighter jet-inspired beast that was fast and fun to drive. There were many other Saab models followed, but none were as unique.
If you have a 9-3 Saab and lose your key fob it is crucial to replace it as fast as possible. Saab vehicles have an immobilizer feature, which requires a specific key for starting. If you have a spare key, the replacement process is easy. If you don't have one it can be expensive and time-consuming.
You can save money if you purchase an old key fob replacement and then have it programmed locally by a locksmith. You should be cautious when purchasing used keys from eBay and other online stores. They may not be authentic, and you may pay more at the end.
Anyone can easily remove the electronics and battery from an old key fob using the small screwdriver that is flathead. Be cautious not to harm any of the tiny electronic components that are inside the case. It is also important to avoid putting liquids on the inside of the case, because it could cause damage. You should also avoid buying cloned keys through aftermarket sellers, as they may not be paired with the CIM on your car.